Sausage Stuffer – 5L – Horizontal – incl 4 Filling Tubes

If you want to make sausages quickly and efficiently, use a professional sausage maker. Thanks to its horizontal position, this sausage stuffer fits on any countertop. With a filling capacity of 5 litres, you can quickly make a large number of sausages. The dimensions of the filling tubes are 16, 22, 32 and 38mm in diameter. As the pressure plate is provided with a hole for venting, as little air as possible enters the sausages. In addition, it is enclosed with a seal. On the side, there is a crank that can be operated manually to make sausages at two speeds.

Quick and easy sausage-making

When making sausages, first choose the desired filling tube. The thinner the tube, the thinner the sausage. Put the ingredients in the reservoir, which you simply tilt towards you to fill. Then slide the casing over the filling tube and hold it firmly in place. With your other hand, turn the crank and the casing will be filled with the sausage meat. Make sure that the sausage is filled tightly without letting too much air in. Your sausage will be ready in no time, and you can move on to the next one.

Made entirely from stainless steel

For good hygiene, the sausage stuffer must be cleaned properly. All parts are made from stainless steel and several parts can be removed for cleaning in the dishwasher. The pressure plate is easy to clean with a damp cloth and disinfectant. After cleaning, you can put all the parts back together again for the next use. The sausage stuffer is also equipped with four rubber feet so that it can be placed firmly without slipping.

Features

• Stainless steel housing, base plate, shaft and pressing plate
• The pressing plate is sealed with a seal
• The output section can be removed at once
• Two speeds for perfect dosing
• Stands on four rubber feet
• Pressing plate with a hole for venting

Product specifications

• Net weight: 12kg
• Filling capacity: 5L
• Cylinder dimensions: Ø14 x 32cm
• Device dimensions: B69 x D30 x H34cm
• Exit cylinder diameter: Ø5cm

Including

• Four stainless steel filling tubes of Ø16cm, Ø22mm, Ø32mm and Ø38mm